Vision Alloys is a trusted supplier, stockist, and exporter of Stainless Steel 304H round bars, delivering high-quality products to industries that require strength, heat resistance, and corrosion protection. This high-carbon version of stainless steel 304 is widely used in heat exchanger tubes, boiler tubes, pressure vessels, and other equipment that operates at elevated temperatures. Thanks to its enhanced carbon content, 304h stainless steel round bars maintain their strength even in environments where standard 304 grades may lose performance.


304H round bars are produced according to international standards like ASTM A276, ASTM A479, ASME SA276, and ASME SA479, and they are labeled with the material code UNS S304.. The alloy typically contains 18–20% chromium, 8–10.5% nickel, and a higher carbon content of 0.04–0.10% compared to 304. This mixture makes the material stronger at high temperatures and helps it resist rust and scaling when used at temperatures up to 870°C. The material is also non-magnetic in the annealed condition and weldable using conventional techniques.


Stainless Steel 304H Bar, 304H SS Round Bar, Stainless Steel 304H Rod, 304H Stainless Steel Round Bar, SS 304H Rod, SS 304H Round Bar Manufacturers in India.


304H Stainless Steel Flat Bar, UNS S30409 Round Bar, SS 304H Round Bar HSN Code, 304H Stainless Steel Square Bar, SS 304H Hex Bar, 1.4948 Round Bar, SS 304H Rod Manufacturers in India


The mechanical strength of stainless steel 304H round bars is one of its key benefits. They offer a tensile strength of around 515 MPa, a yield strength of 205 MPa, and an elongation of 35%, along with outstanding durability in both high-temperature and mildly corrosive environments. This combination of strength and corrosion resistance makes SS 304H bars ideal for petrochemical processing, heat treatment equipment, and power generation applications. The high carbon content allows them to withstand long-term exposure to high heat without significant loss of mechanical properties.


SS 304H round bars are available in a variety of diameters ranging from 3 mm to 800 mm and in custom lengths to suit project requirements. They can be supplied in hot-rolled, cold-drawn, bright, or polished finishes depending on the intended application. Options include solid, hollow, and threaded bar types for different industrial and structural uses. Custom machining and tolerance options are available to ensure a precise fit for any high-temperature or heavy-load installation.


Vision Alloys ensures every SS 304H round bar undergoes strict quality testing, including mechanical, chemical, and dimensional checks, to meet ASTM, ASME, and DIN standards. With a strong supply network and ready stock, they can deliver to both domestic and international markets quickly and efficiently. Their commitment to consistent quality, competitive pricing, and timely delivery makes them a preferred choice for clients looking for UNS S30409 stainless steel round bars for high-performance applications around the world.


304H Stainless Steel Half Round Bar, 304H SS Bright Bar, Stainless Steel 304H Rectangular Bar, 304H SS Rod, ASTM A276 SS 304H Round Bars, 304H Stainless Steel Rod Manufacturers in Mumbai.


what-are-the-most-used-applications-for 304h-stainless-steel-round-bars

fevicon-logo SS 304H Round Bar Specifications

Standard ASTM A479, ASTM A276, AMS 5511, AMS 5513, AMS 5647
Dimensions DIN, EN, ASTM, JIS, ASME, BS, AISI
Hex Bar Size 2-100mm A/F
Round Bar Size Diameter: 3-~800mm
Flat Bar Size Thickness: 2 -100mm
Width: 10 to 500mm
Angle Bar Size 3mm*20mm*20mm~12mm*100mm*100mm
Square Bar Size 4 to 100mm
Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Rectangular Bars Section 3.0 to 12.0mm thickness
Threaded Bar Billet Size 1/2 to 495mm Diameter
Rectangles Size 33 x 30mm to 295 x 1066mm
Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Surface Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished
Form Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc.

fevicon-logo Thermal Properties of Stainless Steel 304H Round Bar
Property Value Units Description
Thermal Conductivity 16.2 W/m·K at 100°C Indicates the rate of heat transfer through the material
Specific Heat Capacity 500 J/kg·K Amount of heat required to raise the temperature of 1 kg by 1°C
Melting Point 1400 - 1450 °C Temperature range where the alloy changes from solid to liquid
Coefficient of Thermal Expansion 17.2 µm/m·K at 20-100°C Rate of expansion in response to temperature increase
Thermal Diffusivity 3.95 mm²/s Measures the rate at which heat spreads through the material

fevicon-logo Heat Treatment of Stainless Steel 304H Round Bar
Heat Treatment Process Temperature Range Cooling Method Resulting Properties
Solution Annealing 1010 - 1120 °C Air or water quenching Enhances ductility and corrosion resistance by dissolving carbides
Stress Relief Annealing 300 - 400 °C Air cooling Reduces residual stresses without significantly affecting hardness
Carburizing (Not Recommended) - - Carburizing is not recommended for austenitic stainless steel as it can reduce corrosion resistance
Sub-Critical Annealing 750 - 850 °C Air cooling Enhances toughness while retaining moderate hardness

mechanical-properties-304h-ss-round-bar

Applications: Stainless Steel 304H round bars find applications in a variety of industries, including


1. Chemical Processing: Used in reactors, pipelines, and storage tanks for its corrosion resistance.


2. Pharmaceuticals: Preferred for its hygienic properties in the manufacturing of pharmaceutical equipment.


3. Food and Beverage: Used for processing and storage of food products due to its non-reactive nature.


4. High-Temperature Applications: Suitable for applications involving extreme heat and mechanical stress, such as in power generation.


fevicon-logo Equivalent Grades Of Stainless Steel 304H Round Bar
STANDARD WERKSTOFF NR. UNS JIS
SS 304 1.4948 S30409 SUS 304H

fevicon-logo SS 304H Round Bar Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
SS 304H 0.10 max 2.0 max 0.75 max 0.045 max 0.03 max 18 – 20 8 – 10.5

fevicon-logo Mechanical Properties of SS 304H Round Bars
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Blog Icon

If would you like to inquire or place an order.
+91 22 6659 5948


fevicon-logo Types of Stainless Steel 304H Round Bar

Hex Bar

304H Stainless Steel Hex Bar

Flat Bar

SS 304H Flat Bar

Square Bar

SS 304H Square Bar

Threaded Rod

304H Stainless Steel Threaded Rod

Bright Bar

304H Stainless Steel Bright Bar

Rectangular Bar

304H SS Rectangular Bar

Hollow Bar

Stainless Steel 304H Hollow Bar

Triangle Bar

304H Stainless Steel Triangle Bar


Quality Assurance

To preserve the high standards of our selection of industrial round bar, we have always adhered to a systematic quality management process.

Team OF Experts

Our staff of experts is vibrant and talented, and they have always been our largest supporters and contributors to our success. Our vision is to create a world of round bar.


Round Bar Manufacturers In India

  • Hardness Test

  • Chemical and Physical Testing

  • Tensile test on metals - ISO 6892-1

  • Universal Testing Machine


fevicon-logo Other Types Of Stainless Steel 304H Round Bar

SS 304H Bars Supplier in Mumbai SS 304H Round Bar Suppliers
304H Stainless Steel Round Bar Manufacturer in India Stainless Steel 304H Square Bar
SS 304H Round Bar Manufacturer in Mumbai 304H Stainless Steel Bar Stock
SS 304H Rod Suppliers in India Stainless Steel 304H Industrial Bar
1.4948 Round Bar Stainless Steel 304H Cold Drawn Round bar
SS 304H Round Bar Manufacturers in Mumbai SS 304H Precision Ground Bar
ASTM A276 304H Stainless Steel Bar 8mm 304H Stainless Steel Rod
Stainless Steel 304H Polished Bar Stainless Steel 304H Round Bar Suppliers in Mumbai
UNS S30409 Round Bar SS 304H Bar Manufacturer in Mumbai
SS Rod 304H Price ASME SA276 304H Stainless Steel Rod
SS 304H Rod Weight Calculator 304H Stainless Steel Round Bar Tolerances
304H 12mm Stainless Steel Rod Stainless Steel 304H Hexagonal Bar
Stainless Steel 304H Round Bar Supplier in India Stainless Steel Rod 304H Price Per Kg

fevicon-logo Stainless Steel 304H Rods Application Industries

Aerospace Industry
Nuclear Industry
MEdical Industry
Marine Industry
Mining Industry
Automotive Industry
Construction Industry
Manufacturing Industry
Logo
Round Bar