Specialist in Manufacturing Industrial Steel Fasteners

Stainless Steel 316/316L/316Ti Round Bars

Vision Alloys is a top manufacturer and exporter of Stainless Steel 316 Round Bars, Stainless Steel 316/316L/316Ti Round Bars and Rods. We are offering SS 316/316L/316Ti Round Bars and Rods according to the requirement of our local and worldwide clients and deliver quality products on time. We have Stainless Steel 316/316L/316Ti Round Bars and Rods in different sizes and shapes.

Stainless Steel 316/316L/316Ti Round Bars are accessible in various sorts:
  1. Stainless Steel 316/316L/316Ti Round Bars (ASTM B / ASME SB 166)
  2. 316/316L/316Ti Stainless Steel Round Bars
  3. Stainless Steel UNS S31600/ S31603 / S31635 Round Bars & Bars
  4. Stainless Steel 316/316L/316Ti Bright Bar & Rods
  5. Stainless Steel DIN 1.4401/ 1.4432/ 1.4571 Round Bars & Rods
  6. Stainless Steel UNS S31600/ S31603 / S31635 Bars
  7. Stainless Steel 316/316L/316Ti Polish Bars
  8. Stainless Steel 316/316L/316Ti Black Bar
  9. Stainless Steel 316/316L/316Ti Forged Round Bar

This Stainless Steel 316 Round Bar is a mixer of the chromium and nickel. Our SS 316 Round Bars and Stainless Steel 316 Rods are in light of current circumstances used as a piece of its tempered state and have a high simplicity of formability and creation. Generally called UNS S31600, these SS 316 Rods is an adaptable and extraordinary.

Our Stainless Steel 316L Round Bars is the low carbon variation of 316 and has to an extraordinary degree taking off resistance from honing (grain restrict carbide precipitation), these 316L Stainless Steel bars are at long last used as a piece of the oil and gas and compound organizations for its practical utilization resistance and adequacy of produce. These Stainless Steel 316Ti Round Bars gives awesome raised temperature flexible, slither qualities and push burst, together with a couple of properties of having shocking formability and weld ability.

SS 316/316L/316Ti Round Bars and Rods Application:

Food preparation equipment, especially in chloride environments, Chemical processing, equipment, Laboratory benches and equipment, Rubber, plastics, pulp & paper machinery, Pollution control equipment, Boat fittings, value and pump trim, Heat exchangers, Pharmaceutical and textile industries, Condensers, evaporators and tanks.

Specification:

Standard 316 / 1.4401
316L / 1.4404
316TI/1.4571
Designation ASTM, ASME, AISI A 276 , SA 276, A 479, SA 479
Range 3 MM TO 350 MM DIA
Finish Bright, Polish & Black
Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.
Application Food preparation equipment, especially in chloride environments, Chemical processing, equipment, Laboratory benches and equipment, Rubber, plastics, pulp & paper machinery, Pollution control equipment, Boat fittings, value and pump trim, Heat exchangers, Pharmaceutical and textile industries, Condensers, evaporators and tanks.

Chemical Composition :

C Mn Si P S Cr Mo Ni N
316
(S31600)
0.08
max
2.0
max
0.75
max
0.045
max
0.03
max
min: 16.0
max: 18.0
min: 2.0
max: 3.0
min: 10.0
max: 14.0
0.10
max
316L
(S31603)
0.03
max
2.0
max
0.75
max
0.045
max
0.03
max
min: 16.0
max: 18.0
min: 2.0
max: 3.0
min: 10.0
max: 14.0
0.10
max
316TI(S31635) - - - - - 16.0 2.00 10.0 -
0.08 2 0.75 0.045 0.03 18.0 3.00 14.0 0.1

Mechanical Properties :

Grade Tensile Strength
ksi (min)
Yield Strength
0.2% ksi (min)
Elongation % Hardness (Brinell) MAX Hardness
(Rockwell B) MAX
316
(S31600)
75 30 40 217 95
316L
(S31603)
70 25 40 217 95
316TI(S31635) 515(Mpa) 205(Mpa) 35 205 75

Physical Properties of 316/316L :

Density
lbm/in3
Thermal Conductivity
(BTU/h ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/°F x 10-6
Specific Heat
(BTU/lb/°F)
Melting
Range (°F)
0.29 at 68°F 100.8 at 68 212°F 29.1 at 68°F 29 8.9 at 32 – 212°F 0.108 at 68°F 2500 to 2550
9.7 at 32 – 1000°F 0.116 at 200°F
11.1 at 32 – 1500°F

Physical Properties of 316H :

Physical Properties (Room Temperature)
Specific Heat (0-100°C)
500
J.kg-1.°K-1
Thermal Conductivity
14.6
W.m -1.°K-1
Thermal Expansion
16.5
mm/m/°C
Modulus Elasticity
193
GPa
Electrical Resistivity
7.4
μohm/cm
Density
7.99
g/cm3

Vision Alloys exports Stainless Steel 316/316L/316Ti Round Bars to countries like Saudi Arabia, United Arab Emirates, Singapore, Malaysia, Germany, Iran, United Kingdom, Italy, Israel, Russia, United States Of America, South Africa, Kenya, Nigeria, Phillipines.

Our Products
Send Enquiry